faq
  • Q1: What is the difference between a Class I and Class II power supply?

  • A:

    An IEC Class I power supply has an ac safety ground connection and thus is allowed to have only a single layer of insulation between the user and hazardous voltages. An IEC Class II power supply does not have an ac ground connection and uses double or reinforced insulation between the user and hazardous voltages.

    A Class II power supply is an IEC rating for an ac-dc power supply which does not have an ac ground connection and uses double or reinforced insulation between the user and hazardous voltages. A class 2 power supply is an NEC label for a supply which has a limited power delivery capability and thus the wiring between the supply and the load presents less of a fire hazard.

  • Q2: What does mean time between failures (MTBF) mean?

  • A:

    MTBF is the “Mean Time Between Failure” and is a measure of a products reliability. It applies to repairable systems, whereas a similar MTTF (Mean Time to Failure) is used for non-repairable systems. The value can be useful in comparing different designs, but not as a direct estimate of a products expected lifespan. There are different standards for calculating the MTBF. Two commonly used standards are the MIL-HDBK-217F and Telcordia SR332.

  • Q3: What are 60601-1, 62368-1, 61347-1 and 60335-1 safety standards?

  • A:

    IEC 60601-1 is a set of safety regulations governing medical electronic products. IEC 60335-1 is a set of safety regulations governing household electronic products.
    IEC 61347-1 is a set of safety regulations governing lighting products.
    IEC 62368-1 is a set of safety regulations governing internet communication technology and audio-visual electronic products.

  • Q4: How to control the product quality?

  • A:

    The components all come from famous factories; Factory has professional QA employees that checking the incoming components. Professional production & detection equipments, Multiple detection processes, 100% full load burn-in.

  • Q5: Will Each Of Your Product Tested Before Shipment?

  • A:

    Yes, each of our Power Adapters,Battery Chargers and LED Drivers will be strictly tested before shipping. The last four processes of testing is Open Frame Performance Testing — Plastic Housing Integrated —- 4-hour Aging Testing — Drop Testing —- Final Performance Testing — Packaging.

  • Q6: What Is The Warranty Of Your Products?

  • A:

    We offer 3 years guarantee for our Battery Chargers, Power Adapters and LED Power Supplies, at the same time if the products was damaged undesigned, we are willing to replace unconditionally.

  • Q7: What can you do if the product is broken?

  • A:

    We promise to replace new ones to you if there is any defective happen during the warranty period.We promise to replace new ones to you if there is any defective happen during the warranty period.

QINX

Connect With Us
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Way to contact us.

    Copyright © Qinx Technology Co., Ltd..All Rights Reserved.
    Welcome To QINX

      To know more our Power adapters/LED drivers/power supplies/Chargers, pls send email to us, we will reply you soon.

      Home

      Products

      About

      Contact